445001-010 G20NE
6
EN
G
LIS
H
REGULAR USE:
Enjoy hand sanitizing
Open Dispenser
Install Batteries/DC Adapter
Fill Liquid
1. Key
2. Front Shell
Refillable Bottle
Sensing Distance: 8-12cm
*The DC Adapter is not including
4Pcs Batteries
(1.5V'4Pcs, Size AA)
included
DCAdapter
*
(6V1A,Optional)
figure 1
figure 2
figure 3
figure 4
1. Screw the dispenser to the metal holder with the supplied bolts.
2. Open the housing (figure 1) with the supplied key (1) and open the cover as shown (2)
3. According to (Figure 2) shown, slide open the battery cover in the direction of the arrow, install four
batteries (1.5V Type C), close the battery cover.
If using DC power (direct current), do not install the batteries, and connect the DC adapter to a 220V
outlet and the DC connector.
4. Remove the rubber cap from the container and pour the disinfectant liquid into the container.
5. Make sure that the syringe is properly mounted (figure 3).
6. Close the hood and turn the appliance on, the LED indicator:
1. flashes every 5 sec. green: the dispenser is operating.
2. flashes every 5 sec. red: low battery and replace it.
3. flashes every 2 sec. red: there is something under the sensor, remove it.
7. When in use, keep your hand 8-12 cm from the sensor, the dispenser will automatically spray liquid.
8. The device can also be mounted on the wall (without stand).
USAGE:
Use the ON / OFF button to activate and turn off the device.
The device has a digital circuit, infrared sensors and works on 4 batteries Type C (included)
or on a 1.5V adapter (not included).
Suitable for a variety of disinfectants.
Low energy consumption and therefore a longer battery life and therefore ideal for placement in public places.
Automatic dosing system: due to the non-contact operation, it prevents the spread of bacteria.
PARTS:
1. Key
2. Backplate
3. Frame
4. Indicator
5. Sensor window
6. ON/OFF switch / DC-connector
7. Battery Box
8. Nozzle
9. Hood
