C2A6 - Webcam installation and operation manual
2010-06-02
5 |
P a g e
Part-financed by the European Union (European Regional Development Fund)
However, for instance the Skype communicator usually detects a new webcam automatically after it
is connected to the PC and makes the video service possible immediately during calls.
2
nd
Step
Install the camera to provide the optimum image. If you use it for video-chats, the best location will
be the upper part of a monitor. Avoid installations opposite the source of light and surfaces that
reflect it, such as mirrors, as they may cause interference and poor quality of images.
3
rd
Step
Configure the settings of a webcam. Set the suitable sharpness, brightness and sound (if a micro-
phone is built-in). After you finish, a window will be displayed that the camera is on. You usually have
to start a special programme to make the camera work. If necessary, you may minimise the window.
4
th
Step
Check if the installation is complete – you may use special applications, for example Skype. Even if
your webcam is on, it may be necessary to add it by selecting camera settings in the software. Click a
relevant icon and the imaging should commence. After that, check the quality of images. If you want
to improve it, return to the webcam settings and adjust them.
5
th
Step
Use as much light as possible, if you film an interior. During a video conversation, focus light on
yourself. Although more and more cameras can be used in the dark, the insufficient lighting will
lower the quality of images and transmission speed.
2
nd
METHOD
1
st
Step
After connecting a webcam to a PC with a USB cable, the operating system will detect the new
appliance automatically and display consecutive massages of the installation process (it may be
necessary to use a CD enclosed to the webcam or to have an Internet connection to install the
required drivers).
2
nd
Step
After installing the drivers, it may be necessary to start the Setup.exe file and follow the displayed
instructions.