2
6
Irregular / round back TVs
TVs with inset mounting holes
Extra space is needed to access cable connections
DO NOT TIGHTEN SCREWS WITH ELECTRIIC DRILL/SCREWDRIVER. HAND TIGHTEN ONLY.
Hand thread screws into the threaded inserts on the back of your TV to determine which screw
diameter (M4, M5, M6, or M8) to use. Attach TV to Extended Arm (B).
If your TV has a flat back, use the shorter screws. Spacers and longer screws are supplied to
accommodate:
It is recommended two people, one on each side of TV participate in attaching TV to
wall bracket
.
360°
±90°
-15°
+15°
E
To adjust angle of your TV, hold the TV lightly, then swivel, tilt or rotate it to your desired position.
If you tilt the TV angle, first loosen the screw as shown above with spanner (E), tilt the TV
to your desired angle. When TV is at desired angle then you can retighten the screw.
Washer O or R
Spacer S or T
