Cata TFB-2003, Installation, Use And Maintenance Instructions, Page: 25 / 46

45
HU
EN
SAFETY
Dear Customer,
Thank you for buying our hood. Please read these instructions carefully for its
optimum installation, use and maintenance.
This appliance has been designed and manufactured exclusively for use at
home.
In order to ensure optimal installation, use and maintenance of the appliance,
we recommend that you read these instructions carefully.
Check the appliance before installing it. Do not use the hood if it is damaged or
faulty. If this is the case, please contact your distributor or installer.
Warning:
You must comply with existing legislation on emission of fumes and
environmental ventilation. Do not connect the hood to another vent for smoke,
ventilation or hot air which is already being used by other appliances that are
fuelled by gas or another fuel.
For optimal and safe performance, the pressure in the room should not drop by
more than 4 Pa (0.04 mbar). For this purpose, sufficient permanent air inlets
should be provided to prevent the premises from being sealed.
If a kitchen extractor hood and appliances fuelled by gas or another fuel are
used simultaneously, there must be an appropriate ventilation system in the
room.
Connecting the hood to the grid
Warning: before connecting the hood: shut off the power supply and check that
the voltage and frequency supply matches that indicated on the rating plate of
the equipment.
If the appliance is equipped with a plug, connect the hood to a socket located in
45