Cata 8422248602839 Manual Download Page 8

Safety

These instructions are for your safety. Please read through 

them thoroughly prior to installation and retain them for 

future reference.

This appliance complies with all current European safety legislation, 

however, the Manufacturer must emphasise that this compliance does 

not prevent the surfaces of the appliance from heating up during use and 

remaining hot during its operation.

Accessible parts may become hot during use. Young children should be kept 

away. Care should be taken to avoid touching the appliance (e.g hob, cooker).

The Manufacturer highly recommends that this appliance be kept out of the 

reach of babies and small children.

Children should be supervised to ensure that they do not play with the 

appliance.

This appliance is not intended for use by persons (including children) with 

reduced physical sensory, or mental capabilities, or by those who lack 

experience and knowledge, unless they have been given supervision and 

instruction concerning the use of the appliance by a person responsible for 

their safety.
Means for disconnection must be incorporated in the fixed wiring in 

accordance with the wiring rules. An all-pole disconnection switch having 

a contact separation of at least 3 mm in all poles should be connected in 

fixed wiring.

Do not allow the electric cables to touch the hot parts of the appliance.

Make sure that the power cord is not caught under or in the appliance and 

avoid damage to the power cable.

Do not install the appliance outdoors in a damp place or in an area which 

may be prone to water leaks such as under or near a sink unit. In the event 

of a water leak allow the machine to dry naturally.

Please dispose of the packing material carefully.

Do not use flammable sprays in close vicinity to the appliance.

•  All installation work must be carried out by a 

competent person or qualified electrician.

•  This appliance must be installed correctly by a 

suitably qualified person, strictly following the 

manufacturer’s instructions.

8

Getting

 started...

GB IE

Summary of Contents for 8422248602839

































Reviews: