CASUALPLAY KODE FIX SAFE TECH, Instructions Manual, Page: 17 / 58

15
go through the guides marked in red.
Fasten the seat belt buckle (fig.9).
•
Adjust the headrest so that it is at the correct height, and tighten the seat belt. •
WARNING: Make sure that the seat belt is not twisted.
Removing the safety seat
Unfasten the seat belt. •
Take the abdominal part of the vehicle seat belt out of the guides, and then do the •
same with the diagonal part.
Take the child out of the restraint system.
•
If you have used the fix connectors to fasten the safety seat to the vehicle seat, press •
the buttons on both sides and release the safety seat (fig.10).
If you want to leave the safety seat installed in the car, unfasten the seat belt buckle,
•
take the child out of the seat and then fasten the vehicle seat belt again.
Removing the upholstery
Take the upholstery off the headrest (fig.11). •
Take the upholstery off the backrest (fig.12). •
Lastly, take the upholstery off the seat (fig.13). •
Follow the same steps in reverse to put the upholstery back on again. •
Maintenance
Clean the plastic parts with mild soap and warm water. •
Wash the upholstery and fabric parts by following the washing instructions indicated on •
the different fabric care labels.