Page 5
Switching the Instrument On & Off
Press and release the
POWER
button once and the instrument turns on.
Allow the instrument to scroll through its start-up sequence before pressing
any other button; this will take approximately 3 seconds.
When the instrument has completed its start-up sequence the display will
change to LP in PAUSED mode using the settings that were last selected.
To switch off, press and release the
POWER
button once and the display
goes blank.
PLEASE ENSURE THAT ALL REQUIRED READINGS FROM THE INSTRUMENT
HAVE BEEN COLLECTED BEFORE TURNING OFF THE INSTRUMENT AS ALL
DATA IS LOST WHEN THE INSTRUMENT IS TURNED OFF.
i
(Information) Button
A scrolling sequence exists with this button, repeated pressing of the button
will allow you to scroll through the various information screens available on
your instrument.
BAT
▌▌▌▌
Battery capacity remaining
dBA SLOW
Indicates the current frequency and time weighting
SD 08:00
Shows the shift duration setting
90/3
Indicates the current criterion and exchange level
TH -10dB
Shows the threshold setting
(relative to the criterion level)
VER1.04
Indicates the firmware version number
PLAY
Indicates the instrument is in PLAY mode
PAUSED
Indicates when the instrument is in pause mode
(only displayed if instrument is in pause mode)
