3. Fix the bracket into place by using the
three ST4*35 screws and make sure the it
is fixed securely.
4. Before attaching the heater, make sure
the power switch is on. Fix the heater
onto the bracket using the two M6*14
screws and butterfly nuts
Operating Instructions
The mains power switch on right side to control power on/off. This must be
switched ON in order to operate the remote control.
Remote Control
1. On / Off
Switches the heater on or off.
2. Increase Heat Setting
Increase heat mode from F1 up to F9
3. Decrease Heat Setting
Decrease heat mode from F9 down to F1
4. Medium Heating
1000W Heating Power.
5. Maximum Heating
2000W Heating Power.
6. Timer Control
Set timer between 1-24 hours
