Scissor Lift
QJY-S3
6
FIGURE A
1.6.3
Extension cords -115volt
115 volt Double Insulated power equipment can use either a two or three
wire 115 volt extension cord.
As the distance from the supply outlet increases, you must use a heavier
gauge extension cord. Using extension cords with inadequately sized wire
causes a serious drop in voltage, resulting in loss of power and possible tool
damage.(See Figure B, next page.)
The smaller the gauge numbers of the wire, the greater the capacity of the
cord. For example, a 14 gauge cord can carry a higher current than a
16gauge cord.(See Figure B.)
When using more than one extension cord to make up the total length, make
sure each cord contains at least the minimum wire size required.(See figure
B)
If you are using one extension cord for more than one tool, add the
nameplate amperes and use the sum to determine the required minimum cord
size. (See Figure B.)
If you are using an extension cord outdoors, make sure it is marked with
the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.
Make sure your extension cord is properly wired and in good electrical
condition. Always replace a damaged extension cord or have it repaired by a
qualified electrician before using it.
Protect your extension cords from sharp objects, excessive heat, and damp
or wet areas.
