Scissor Lift
QJY-S3
15
WAENING!
12.
Move the rubber saddles (39B) and plates (42B) inward, out of the path of the vehicle.
(See Figure F.)
13.
Disengage the vehicle parking brake. Start the vehicle’s engine, and drive the vehicle off
the scissor lift slowly and carefully.
5
Inspection, maintenance and cleaning
1.
Always unplug the power cord from its electrical outlet before
performing any inspection, adjustments, maintenance, or cleaning.
2.
Before each use,
inspect the general condition of the scissor lift. Check for loose screws,
misalignment or binding of moving parts, cracked or broken parts, damaged electrical
wiring and hoses, and any other condition that may affect its safe operation. If abnormal
noise or vibration occurs, have the problem corrected before further use.
Do not use damaged equipment.
3.
Daily:
With compressed air or a vacuum, remove all dirt and debris from the scissor lift.
Also, use a detergent or mild solvent to remove oil and grease from the unit. Then, use a
premium quality, machine oil to lubricant all moving parts.
4.
Daily:
Check the level of hydraulic oil in the oil tank. The oil tank (13A) has a holding
capacity of 6.5 quarts. To fill the oil tank, squeeze and hold the brake lever (13B) to
release any load on the scissor lift. Remove the oil tank fill cap on the oil tank. Add a
premium quality hydraulic oil until the level of oil is even with the oil tank’s fill hole.
Then, replace the oil tank fill cap.
(See figure E)
