Castel SAT802S User Manual Download

Page: 11 / 16

China Aerospace Telecommunications Ltd

3) Fix the side plate to the main unit, fasten the screw and secure it.

4.2 Placement of SAT802S main unit

The location for placement of the SAT802S main unit should be determined in advance. The

location should allow anti-humidity, avoidance of high-temperature area, and be far away

from magnetic field and other sensitive electronic equipment.

4.3 Installation of GPS antenna

GPS antenna must not be installed under metal baffle plate because it can hinder receipt of

GPS signals, thus affecting the normal monitoring and positioning of the SAT802S main unit.

Try to install GPS antenna as horizontally as possible. Place the convex upward, and its

included angle with the ground must not exceed 15 degrees. Besides, it must be fixed

securely.

4.4 Installation of Iridium antenna

Iridium antenna must not be installed under metal baffle plate because it can hinder

transmission and receipt of satellite signals. Try to install Iridium antenna as horizontally as

possible. Place the antenna upward without high buildings nearby and its included angle with

Face to sky

Summary of Contents for SAT802S
















