Castel MPIP-610A, User Manual

Page: 5 / 7

V Installation of MPIP-610A
5.1 Installation and Commissioning Process
5.1.1 Insertion of SIM card:
Open the cover and insert a SIM card to corresponding slot. Make sure the SIM card
is well fitted into the slot. Open the GPRS service of the SIM card and note down
number of the SIM card.
5.1.2 install the battery on the motherboard after inserting the SIM card to the host.
Flashing of the red light indicates operation of the host.
5.2 Parameter Settings
No.
Command
Prompts
Formats and Examples of
Command Prompts
Display Notes
1
Inquire parameters
of the device
PARAM#
Display settings of
relevant parameters
2
Bind the cellphone
number
Alarm, A,15912345678#
Successful setting
alarm 1:15912345678
General
3 Regular uploading Timer,24#
（
on basis of hour
）
An interval of 24 hours
Corporate
protocol
4
Inquire the version
No.
Version#
Display relevant
parameters
General
5 APN setting
APN, APN name, user name,
password#
Successful setting of
APN
General
6
Domain name, IP,
setting of the
terminal No.
Server,1,www.sdwzt.net,8011
#
Server, 0,192.168.1.1,8011#
Successful setting of
domain name or IP
General
VI Common Problems
6.1 The device doesn’t work
Users should first check whether battery capacity and GPRS service are normal and
then check whether settings of the device are appropriate. If finding no problems after
an overall check, users should reset the device (sending FACTORY# to the device).
6.2 Users can check information about the device by sending PARAM# to the SIM
card of the device.