cassini C-1000120TR, Operating Instructions Manual

Page: 7 / 19

ASSEMBLY INSTRUCTIONS
1 REMOVE PRE ASSEMBLED TRIPOD
. -
2 ADJUST TRIPOD TO PROPER HEIGHT BY LOOSENING ADJUSTING
. ,
AND TIGHTENING THE LOCKING KNOBS.
4 ATTACH ACCESSORY TRAY
.
ACCESSORY TRAY
HOOK
HOLDER
(
1
)
SPREAD TRIPOD LEGS APART SO THE TRAY WILL FIT UNDERNEATH
(
2
)
PLACE THE TRAY
'
S HOOK OVER THE HOLDER
'
S METAL ROD AND PUSH DOWN
(
3
)
TIGHTEN THE HOLDER
'
S LOCKING KNOB TO HOLD THE ACCESSORY TRAY IN PLACE
7
CASSINI REFRACTOR TELESCOPE
LOCKING KNOB
5. ATTACH THE TELESCOPE TO THE TRACKER MOUNT.
CAUTION: NEVER POINT YOUR TELESCOPE
AT THE SUN. VIEWING THE SUN WITH
THIS TELESCOPE OR EVEN THE UNAIDED
EYE CAN RESULT IN BLINDNESS OR OTHER
SERIOUS EYE DAMAGE.
3. ATTACH TO TRIPOD. TRACKER MOUNT (AS SHOWN)
REMOVE CONNECTING KNOB FROM BOTTOM OF
THE MOUNT. PLACE THE MOUNT ON TOP OF THE
TRIPOD AND RECONNECT THE KNOB.
LOOSEN CONNECTING TRACK KNOB AT THE TOP
OF THE TRACKER MOUNTING BRACKET. SLIDE
THE TELESCOPE INTO AND CENTER IT IN
THE MOUNTING BRACKET. TIGHTEN THE
CONNECTING KNOB.