Cassida Xpecto LiTE MIX value counter
moving money forward
1
7
1
6
• Contact the technician for service or repair. Do not try to replace any parts by yourself.
• When not using the unit for an extended period of time, disconnect the
will expose you to dangerous voltages and other safety risks. Incorrect reassembly can cause
electrical shock when the appliance is
• When finished operating, ensure there are no bills in the hopper or transport
system
power cord from the wall outlet
• To avoid the risk of electrical shock, do not disassemble this unit. Disassembly
• Clean the unit regularly
• Use a surge protector or power conditioner when possible
• Unplug the unit from the wall outlet before cleaning. Use a damp cloth or specifically designed
maintenance accessories such as an air duster, soft bristle brush, or cleaning cards
subsequently used
• Avoid dropping the unit
Error message
Solution
ERROR MESSAGES
While in SORT mode, this error will occur when a bill is
passed that does not conform to the denomination of the
first bill passed in the stack
DENOMINATION
ERROR
While in ORIENTATION mode, this error will occur when a bill
is passed that does not conform to the orientation of the
first bill passed in the stack
ORIENTATION
ERROR
While in FACE mode, this error will occur when a bill is
passed that does not conform to the facing of the first bill
passed in the stack
FACE ERROR
This error will occur when bills are pulled through the
machine incorrectly and may cause a miscount
CHAIN ERROR
Error message
Solution
This error will occur if two bills pass through the machine
while stuck together and may cause a miscount
DOUBLE ERROR
This error will occur if the machine does not recognize
the bill that was passed through the machine
IMAGE ERROR
This error will occur if the machine suspects a bill to be
counterfeit based on Infrared scanning
IR SUSPECT ERROR
This error will occur if the machine suspects a bill to be
counterfeit based on magnetic scanning
MG SUSPECT ERROR
This error will occur if the machine suspects a bill to be
counterfeit based on ultraviolet scanning
UV SUSPECT ERROR
Check if the upper door is open or a bill exists in the bill
path.
CHECK PS1
Check if the lower door is open or a bill exists in the bill path.
CHECK PS2
3
.
MAINTENANCE, WARRANTY, AND SHIPPING INFO
4
.
WARNING:
This unit has many sophisticated sensors. To keep the machine running
correctly, it requires proper maintenance. If you notice performance has
deteriorated, please clean all sensors prior to calling a technician. Unplug the
machine completely from all electrical sources before attempting any cleaning
process.
adheres to the sensors, it may cause various problems during operation of the machine.
to the sensors, which are delicate components. If any dust or other foreign matter
All parts of the
Xpecto LiTE
need daily care and cleaning. Pay close attention