Cassese CS200 CART, User & Parts Manual

Page: 17 / 64

USER MANUAL CS200 CART
17
3.I CHANGING WEDGES SIZE
Repeat procedure of Figure 3-21, then remove the cartridge and insert another cartridge of a different color. Thanks to the cartridge
system, no need to adjust anything nor change any head.
Then turn back OFF the loading button.
3.J SETTING THE SHOOTING POSITIONS
After performing the adjustments of chapter 3 (ADJUSTMENTS). Perform the following procedure:
Unlock the stop
position handle.
Figure 3-25
Figure 3-26
Put on the table only
one
chop of
moulding against the
fence as per picture.
This will allow easy
visualization
of
stapling positions
Rotate the pre-
clamping button in
the ON position.
Figure 3-23 Figure 3-24
Rotate the joystick to
be able to move to
the inside shooting
position. Once the
desired position is
reached, release the
joystick.
Move the stop to the
joystick assy until it
hits the aluminum
support
of the
joystick.
Lock the handle of
the stop. This will set
your extreme inside
position.
Figure 3-27