Cassese CS1 UNI, User & Parts Manual

Page: 9 / 40

Non contractual document - Cassese France
®
- Document non contractuel
6
LOADING WEDGES
CHANGING SIZE OF WEDGES
USE
The CS1 UNI comes with 3 stapling heads, each corresponding
to a specific size of wedge, which are 7, 10 & 12mm.
The following procedure is to be followed for installing the
stapling head on the machine :
Insert the stapling head corresponding
to the size of wedge chosen and tighten
it with the 2.5mm Allen key.
Pay attention to install stapling head
with the flat side at the top.
Using the 2.5mm Allen key provided,
unscrew the locking screw of the stapling
head located on the machine.
Remove the stapling head by pulling
it upwards.
MEANS OF JOINING
Joining is performed using metal wedges specially
designed to ensure perfect corners.
Five standard sizes are available: 5, 7, 10, 12 and
15mm (3mm wedges can be fired with 5mm stapling
head) for softwood (SW), hardwood (HW) or MDF.
For the best corner join, reliability and performance,
use only Genuine CASSESE MASTERS™ wedges type
“UNI” with your CS1 UNI.
7
10
12
Turn handle for loading wedges 3 in
direction of arrow in order to bring
back wedges pusher.
While holding handle in this position,
insert strip of wedges into wedges
channel.
Then gently release the handle for
loading wedges 3.
3