B-B ( 1 : 1 )
C ( 1 : 1 )
D ( 1 : 1.5 )
B
B
C
D
Spacer block
3. Remove spacer block from
the button, this is not needed
4. Using silicone adhesive, or
double sided tape, stick the
"half" button onto the one dot
button as shown in the image.
This aids alignment in the next
steps
5. Align the rest of the button on top and press both buttons
to test if they compress fully.
Hold the large button fully compressed and mark the centre
of the 3 mounting holes.
Mounting holes
6. Attach the button using screws appropriate for the base material.
