SETTING
Connect the appliance
Place the pan on the center of the appliance press ON/OFF button (pos.1) to put the appliance on. The digital
screen light up
Press the function knob (pos.2) till the light goes on HEATING on the control screen to select the power. It’s
from 500 to 3000W turning the button clockwise
The factory pre-selected power is 2000W
Press the function knob (pos2) till the light goes on TEMP on the control panel to select the temperature from
60 to 240°C turning the button clockwise.
Press the knob Function (pos 2) till the light goes on TIMER on the control panel to select the timer from 0 to
180minutes turning the button clockwise.
The appliance will automatically go off if no operation on it within 2 hours.
The surfaces can reach very high temperature when in function so be cautious.
This appliance is not dedicated to permanent industrial use.
ADVICE
Your appliance is provided with an overheating protection. When this protection has been activated you must
let your appliance cool down.
If overheating protection is stated regularly, contact your dealer or our after-sales service.
To reset the appliance, press the reset button located on the back side of the appliance. You must unscrew
the plastic protection (counterclockwise), press the reset button and replace the plastic protection (clockwise).
6. CLEANING AND MAINTENANCE
6.1 Safety instructions A insérer sur les matériels électrique chauffants
Before servicing (clean, maintenance, repair) unplug the appliance
Caustic detergents, sodium bicarbonate are forbidden for the cleaning of your appliance.
Check regularly the power cord.
Never dip your appliance in liquid.
WARNING
Not direct washing via water jets. (Neither jet under pressure)
6.2 Daily cleaning
Always unplug the appliance before cleaning or maintenance.
After each using clean the plate with a soft humid cloth
Regularly clean the dust filter. Every parts must be carefully dry before replaced in the appliance.
6.3 Safety instructions relating to maintenance
Daily check the state of your appliance: do not use it if it is damaged or if the power cord is damaged. If the
power cord is damaged it must be replaced by a professional electrician.
In case of break down contact your supplier.
Any intervention work on your appliance must be performed by a qualified professional.
17
Summary of Contents for CPAI500B
Page 10: ...10...
