19
5. Installation and use
5.1 Safety instructions
DANGER ELECTRIC SHOCK
!
-
Don’ t let the power supply cord touch hot parts
-
Don’t let the power supply cord along a table or a counter
-
The appliance must be connected with a single-phase socket in conformity.
-
The plug must be protected by a circuit breaker of at least 16A.The appliance must be unpacked
entirely before the connection.
-
Before any installation check all the electric cables or piping
-
The plug must be easily accessible to be unplugged if necessary.
WARNING !
Operating your appliance can reach very high temperature. To avoid injuries and burns do not
use the appliance if it is damaged. Do no use spare parts not provided with your appliance
DANGER ELECTRIC SHOCK !
In the event of bad installation, the appliance can be dangerous and cause injuries. The electrical safety
of this appliance is ensured only if it is correctly connected to an efficiently earthed system in
accordance with electrical safety regulations. The appliance must be unpacked entirely before the
connection.
5.2 Installation and use
Operating instructions :
-
Remove all protective foils and packaging material prior to usage.
-
Place the appliance on a flat, solid, and heat-resistant surface. Never install your appliance on
inflammable surface.
-
Do not install the appliance near fireplaces or all hot sources.
-
First use
: fill the water tank with water; fit the Pyrex container
with iron wire basket on
. Plug the
appliance to a grounded socket, start it with the On/Off switch, the heating indicator lights in green.
