18
19
Technical information
B
Operation
SparaMosca operation
• Traditional use:
Add the extension (supplied) to the lance.
Position the timed/off/continuous switch
to the "Continuous" position.
Press the button on the lance grip to dispense the liquid and keep it
pressed for the desired time.
The liquid continues to come out continuously.
• Timed use
Position the timed/off/continuous switch
to the "Timed" position.
Remove the extension of the lance to have greater spray dispensing
accuracy.
Adjust the liquid spraying timing to set the millilitres of product to
be dispensed.
Press the button on the lance grip to dispense the liquid.
Any time the button is pressed, the same quantity of liquid is
dispensed, regardless of the time it is pressed for.
IMPORTANT
After each use, make sure the switch is set to "off" before storing
SparaMosca
If the switch remains on the other two positions, the battery will
discharge quickly.
1
SOLENOID VALVE
Specification:
12V, 2 outputs, 8 bar, Q=4.5 l/min, 1/4” fittings
• Bayonet sleeve, patented system to allow quick manual inspection of the pilot.
• Rubber reel holder, elastic ring ensuring the reel can be secured without any
equipment.
• High-precision mechanical machining to achieve the a very low level of
roughness to limit scaling.
• High corrosion resistance due to the low magnetic residue STAINLESS steel
internal gears specifically designed for solenoid valves.
• Operating ambient temperature between -10°C and +50°C;
• Fluid temperature between -10°C and +130°C;
Materials used:
• Brass body CW617N (EN 12165)
• STAINLESS steel internal gears
• AISI 303 STAINLESS steel sleeve (EN 10088-3)
• FPM (Viton), NBR, EPDM, silicone seal materials.
Solenoid valve specification
2
CENTRAL CORE
