5
Installation
A
• First apply a Ø 48 metal pipe (not supplied) to the tank frame.
• Secure the orthogonal joint (code 30) to the pipe, then insert the support
(code 29) in the joint and tighten it.
• Apply EUROGET to the support by means of the bolt and nut supplied
with the support. Firmly tighten the bolts to prevent the accidental fall of the
machine.
• Connect the power cable to the sprayer.
(For more information on the electrical connection, follow the instructions on the next page)
•
Apply the curve code 40A to the central pin (180°) and the small curve code
39AS to the other side pin (90°).
When tightening the nut, always hold tight the stainless steel pipe with the 19
spanner positioned in the relevant socket.
• Actuate the movement of the two curves by means of the side switch and
make sure they are properly positioned and perform the movement shown
in the figure.
39AE
40A
