15
Your device is not cold enough
or it does not reach the
adjusted temperature:
Check the temperature control setting.
External environment may require a higher setting.
The door is open too often. The door is not closed completely.
The door seal does not seal properly.
The wine refrigerator does not have the correct clearance.
Defrost the device.
The light does not work.
Check the service center.
Vibrations.
Check to assure that the wine refrigerator is level.
The wine refrigerator seems to
make to much noise
The wine refrigerator is not level.Check the fan.
The
door
will
not
close
properly.
The wine refrigerator is not level.The door is reversed and not
properly installed.The seal is weak. The shaves out of position.
LED could not display.
Main control board does not work.PCB Problem. There is some
problem with the plug.
LED display error -
Lo
Weak quality of display.Temperature point is out off. Check the
service center.
Buttons are not functional.
Temperature controller panel is damaged.
Compressor will not start
Room temperature is lower than desired temperature.
Compressor re-start
Compressor will stop working when cooling system in the
cabinet reaches presetting temperature, and re-start working
until the desired temperature is achieved. Allow a minimum 5
minute interval before re-starting.
Dew
on
the
surface
of
cabinet
:
The surface of wine cabinet especially the glass door appear
some frost if item in a damp room. This is due to the moisture
in the air coming into contact with the cabinet. Please wipe it
away with dry cloth.
Liquid sound
(
1
)、
The sound of compressor when starts or stops working
(
2
)、
The flowing sound of refrigerant in the refrigeration
system
(
3
)、
The evaporating sound of refrigerant in the evaporator
Condensation formed inside
the cabinet
Under the environment with high level of humidity or the door
of wine cabinet has been left open for a long period or
opened frequently, wipe off the door and walls and leave the
door closed as long as possible.
Error code E2
Desired temperature is not reached.If necessary defrost the
device (Please follow the hints for manual defrosting in chapter
cleaning).
Attention
► If you are unable to solve the problem with the steps shown above, please contact
Customer Service.