Caso SC-08B, Original Operating Manual

Page: 39 / 128

Operation and Handling
caso WineCase 39
13.5.2 stands
The two rear feet and the left front foot can be adjusted so that
the wine refrigerator is always in the balance.
13.5.3 The girp
The handle for opening the door is recessed on the left side of
the door.
13.5.4 Wine shelves
Remove all bottles from the shelves. Lift the shelf upwards and
the gently pull it out. Any of the wine shelves can be removed to
accommodate larger bottles.
13.5.5 To remove a shelf
Remove all bottles from the shelves. Lift the shelf upwards and
the gently pull it out.
Please note
► Ensure that the tabs are firmly engaged in place before
storing any bottles.
► Any of the wine shelves can be removed to accommodate
larger bottles.
► Spread your bottles out as evenly as possible over the
shelves, so weight is not concentrated in one point; and
make sure your bottles will not touch the back of the cabinet.
13.6 Electrical connection
In order to ensure the safe and trouble-free operation of the
device, the following instructions must be observed for the
electrical connection:

Before connecting the device, compare the connection data
(voltage and frequency) on the rating plate with those of your
electrical network. This data must agree in order that no
damages occur in the device. If in doubt, ask your qualified
electrician.

The electrical outlet must be protected by a 16A safety cut-out
switch.

The connection between the device and the electrical network
may employ a 3 meter long (max.) extension cable with a cross-
section of 1.5 mm². The use of multiple plugs or gangs is
prohibited because of the danger of fire that is involved with
this.