Caso CMP1800, Operating Manual

Page: 74 / 223

caso CMP1800 74
15.11 Changing user options
User Options can be changed to suit individual preferences.

Select programming mode
Press and hold Stop for a while. When the oven enters Option
mode, it will show "Code---" in the display

Select Number pad
Press a number pad to be programmed. (1-0) It will show a
option number in the display. Press the number pad again to
change the option.
Each time the number pad is pressed, option will change.

Save
Drücken Sie nach erfolgter Programmwahl die Taste Start, um
die Einstellungen zu speichern. Press START pad to save
changes.
To change additional options, repeat steps 3 and 4.
Number
Pad
function
Display User Options (Factory Settings in Bold)
1
Cook Ending
Signal
Code 1-0
3 long beeps for 3 seconds
Code 1-1 1 short, 1 long beeps for 3 seconds
Code 1-2 3 sceond beep
Code 1-3 3 quick beeps for 3 seconds
Code 1-4 5 quick beeps for 3 seconds
7 Repeat Feature
Code 7-0
Repeat feature not allowed
Code 7-1 Repeat feature allowed
2 Key Beep On/Off
Code 2-1
Prevents beep when a pad is pressed.
Code 2-0 Allows beep when a pad is pressed.
6
Display Off Time
Counter
Code 6-0
Display will turn of if a key isn’t entered in 1 minute.
Code 6-1 Display will turn of if a key isn’t entered in 2 minutes.
Code 6-2 Display will turn of if a key isn’t entered in 3 minutes.
Code 6-3 Display will turn of if a key isn’t entered in 4 minutes.