CASO DESIGN WK2500, Original Operating Manual

Page: 31 / 86

31
Quickstart: Press the -button. The device starts cooking immediately with last selected
temperature (factory setting 99°C). The LED of -button lights up in white during
cooking.
Temperatur setting:
A) With the -button you can select the preset temperature levels (40, 70, 80, 90, 95,
99 °C) and start cooking with the button. The LED of the button lights up in blue.
B) You can change the temperature. If choose 40°C with the button then you can set
the temperature with +/- buttons in 1°C steps. If choose 70, 80, 90, 95, 99, you can set
the temperature with +/- button from 35° - 95° in 5°C steps.
You can start the cooking with the button and the device will switch to standby-
mode after cooking.
Alternatively you can press the button, until the LED lights up in red, then the keep
warm function is activated. You can start the cooking with the button.
Please note
► The blue LED of the button will switch off after 3 seconds without any operation.
► You can stop the cooking at any time by pressing the button.
► Press the button longer and the device switches to standby-mode. The display will
switch off.
► When the keep warm function is activated, then you can stop the function by pressing
the button. Then the red LED of the button will switch off. If you do not stop the
keep warm function then the device keeps the water warm for 2 hours.
► If the cooking is not yet been startet with , then the keep warm function can be
cancled by pressing button again.
► During cooking/keep warm the temperature can be changed.
► The device can be reactivated, by pressing of any button.