CASO DESIGN WineDuett 12, Original Operating Manual, Page: 32 / 88

32
17.1 Safety notices
Attention
►
Only qualified electricians, who have been trained by the manufacturer, may carry out
any repairs on electrical equipment.
►
Improperly performed repairs can cause considerable dangers for the user and
damages to the device.
17.2 Fault indications and rectification of faults
The following table assists in localizing and rectifying minor faults.
Fault Possible Cause
Wine refrigerator does not
operate. Not plugged in or using different voltage.
Defective fuse.
Wine refrigerator is not cold
enough. Wrong temperature setting.
Warm environments may require a lower temperature
setting.
The door is open too often.
The door is not closed completely.
The door seal does not seal properly.
No adequate airflow, please check the clearance around
the device, it should be 10-15 cm at least.
The light does not work. Contact customer service.
Vibrations. Level of refrigerator is not even, adjust the small foot
according to installation instruction.
The wine refrigerator seems
to make to much noise Level of refrigerator is not even, adjust the small foot
according to installation instruction.
Fan is not working properly.
The door will not close
properly. Level of refrigerator is not even, adjust the small foot
according to installation instruction.
The hinge of the door has been reversed and not properly
re-installed.
The seal is weak.
The shelves are out of position.
LED could not display. Main control board does not work.
PCB Problem.
There is some problem with the plug.