CASO DESIGN VC11, Original Operating Manual

Page: 36 / 112

36
If you open the cover, you see the
I Sealing strip: Contains a heating wire covered with Teflon which allows the bag to
seal but not to stick to the strip.
Warning
Please observe the following safety notices in order not to burn or scald yourself or others.
► To avoid getting burned, never touch the sealing bar while the unit is operating.
J Vacuum chamber : Position the open end of the bag inside the chamber.
L Air intake: Air intake connects with vacuum chamber and pump. Do not cover this air
intake when placing bag for Vacuum&Seal operations.
Please note
► Do not remove the Teflon tape (T).
15.2 Rating plate
The rating plate with the connection and performance data can be founded on the back of
the device.
16 Operation and Handing
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
16.1 Operating Instructions
After each sealing session and before starting up, check to
make sure the unit and all accessories that come in contact
with the foodstuff are thoroughly clean. Follow the cleaning
instructions on the description page.
Step 1 : Open the lid and place an open side of the bag in the
chamber.
Step 2:
Press the cover down.
Step 3:
Press for release (E) (after sealing process)