CASO DESIGN NOVEA B4, Original Operating Manual, Page: 31 / 88

Caso Blender NOVEA B4
31
5. To add food or fruit to the jar, remove the measuring cup in the middle of the lid. Add
the food or fruit through the hole in the middle of the lid and then replace the measuring
cup on lid (see fig. 5)
6. Press again if you want to go back to normal state.
Please note
► button can be held longer than 2 seconds if needed.
► The Pulse mode cannot be combined with the Single Serve function!
Warning
► Do not touch blades. Always turn blender off and wait until blades have stopped rotating
before moving jar or lid.
► NEVER start up the blender without the lid and measuring cup. The speed of the blades
will throw contents high up in the jar, and without the lid could spill out.
14.2.1 Using the Single Serve bottle
Warning
Personal and property damages can occur during commissioning of the accessory!
Observe the following safety notices to avoid such dangers:
► Only put the Single Serve Bottle onto the blender if it is completely
assembled! Do not put the blade assembly onto the base on its own!
1. Insert the plug into an appropriate wall socket.
2. Fill the bottle with desired food and secure the blade assembly lid
onto the bottle as shown in Fig. 6.
3. Turn the bottle upside down and place it onto the motor base,
aligning the tabs on the bottle with the motor base.
4. Turn the bottle clockwise.
5. Press , the buttons and will flash. LED display will flash
with 0:00.
6. Press and hold to start blending. Release the button to stop
blending.
7. Blending will stop after 1 minute, even if is still pressed. The
countdown is shown in the display.
8. Counter returns to 0:00 and illumination starts flashing.
9. Press momentarily for pulsed operation.
10. Rotate the bottle counterclockwise and take it out from the base
(Fig. 7).
11. Turn the bottle over and rest it on a flat surface.
12. Replace the blade assembly with the drinking lid (Fig. 8)
13. Raise the cap on the drinking lid to drink the blended contents
directly out of the bottle.