65
Please
note
►
Leave the oven door open to prevent the device from being re-started accidentally.
Exterior housing
Clean the exterior surfaces of the device with a damp cloth.
Metal rack, baking sheet and ceramic base plate
The metal rack and baking sheet must be removed and cleaned occasionally. Wash
them in a warm soapy solution or in the dishwasher.
Wipe the bottom of the oven with a mild cleaning agent. If the floor of the oven is
excessively dirty, you can use a mild cleaning agent.
17 Troubleshooting
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
17.1 Safety notices
Attention
►
Only qualified electricians, who have been trained by the manufacturer, may carry out
any repairs on electrical equipment.
►
Improperly performed repairs can cause considerable dangers for the user and
damages to the device.
17.2 Fault indications
In the event of a fault, an error code will appear in the display; it describes the cause of the
fault.
Error code Description
E-01
Excessive temperature within cooking chamber: The overheating cut-out
terminated the current program at a cooking chamber temperature of
250°C. Press the
Stop
button to acknowledge this fault.
The device can be re-activated after the cool down phase.
E-03
Sensor fault: The device has detected an error on a sensor and has
terminated the current programme.
Press the
Stop
button to acknowledge this fault.
Please
note
►
If error messages continue to appear after an extended waiting period and restarting the
device, then the device will need to be sent to Customer Service to be inspected.
