casmar WS-5446-I, Quick Start Manual

Page: 9 / 12

8
①
Make sure that the camera and the PC are well connected to the LAN.
②
Find the IP-Tool from the CD and then install it in the computer. After
that, run the IP-Tool as shown below.
►Access the camera through IP
-
Tool
5 IE Network Connections
Here we take accessing IP camera via LAN for example. In LAN, there
are two ways to access. 1. Access through IP
-
Tool; 2. Directly Access
through IE Browser
③
Modify the IP address. The default IP address of this camera is
192.168.226.201. Click the information of the camera listed in the above
table to show the network information on the right hand. Modify the IP
address and gateway of the camera and make sure its network address is
in the same local network segment as the computer’s. Please modify the
IP address of your device according to the practical situation.
Device Network Search
Immediate Refresh
name
name
name
IPC
IPC
IPC
unknown
unknown
unknown
192.168.226.201
192.168.1.2
192.168.1.3
80
80
80
9008
9008
9008
255.255.
255.255.
255.255.
Modify Network Parameter
Mac Address
IP Address
Modify
CE :98 :23 :75 :35 :22
192
.
168
.
226 . 201
255
.
255
.
255 . 0
192 . 168 . 226 . 1
i Tip: Enter the administrator password, and
then modify the network parameters.
Total Device: 3 Local IP Address:192 . 168 . 1 . 4 Subnet Mask:255 . 255 . 255 . 0 Gateway: 192 . 168 . 1 . 1 DNS ： 210 . 21 . 196 . 6
Device Name Device Type IP Address Http Port Data Port Subnet Product Model
About
Subnet Mask
Gateway
Restore IPC Default Configuration