Page 3
Safety Information
Read and understand all instructions in this manual before attempting installation, operation or
general maintenance of the Rollataq.
Use only a grounded electrical outlet when connecting the Rollataq to a power source. If you are
unsure, check with a qualified electrician – see “Important information before you start” below.
Observe all warnings and instructions marked on the Rollataq.
Unplug the Rollataq from wall outlets before cleaning or maintenance.
Do not install or operate the Rollataq near water or whilst you are wet.
Make sure the Rollataq is installed on a secure and stable surface.
Make sure the power cord does not obstruct walkways near the Rollataq.
Keep long hair and jewellery clear whilst operating the Rollataq.
Never operate the Rollataq with any guarding removed.
Always disconnect the power to the Rollataq whilst not in use.
If you are in any doubt about the operation of the Rollataq, please call your local service agent.
Important information before you start
A power surge protector should be used with the Rollataq to protect the electronics. Electronics
that are damaged due to power surges are not covered under the standard warranty.
The user is solely responsible to assure that the Rollataq is not connected to the wrong voltage.
Damage caused by incorrect voltage hook-up is not covered under the standard warranty.
We recommend that the Rollataq box and packing materials be kept. While service parts are
available from your dealer and can typically be easily replaced in the field, it may be necessary
to return the Rollataq to the factory for complex service. The Rollataq box and packing material
have been designed to protect the machine from normal handling during transportation.
Use only Rollataq adhesive in this coater
