E-15
Getting Ready
En
gl
is
h
z
The projector’s RGB output terminal supports output of the video signal (analog RGB
signal) from a computer connected to the RGB input terminal only. Output of other types of
signals is not supported.
You can use the projector to project an image from a video deck, TV, video camera, or other
video device. You can also output audio from the video device through the projector’s speaker.
z
Always turn off the projector and the video device before connecting them.
z
You can use the bundled video cable to connect to a pin jack (RCA) type VIDEO output
terminal. When connecting a video camera or other video device with a special video output
terminal, use the special cable that comes with the video device. For details, see the
documentation that comes with the video device.
z
Note that the projector is equipped with separate circuits for the VIDEO input terminal and S-
VIDEO input terminal. Make sure you connect the video device to the correct terminal. The
projector lets you switch the input source between RGB (or Component), VIDEO, and S-
VIDEO whenever you want.
Connecting to a Standard Video Device
RGB input
terminal
AUDIO input terminal
Projector
Audio cable (commercially available)
Monitor
Bundled mini D-Sub cable
To monitor terminal (analog RGB output terminal)
To line output terminal
Mini D-Sub cable (commercially available)
RGB output
terminal
To analog RGB input terminal
Computer
Projector
Video device
Commercially available audio cable
Bundled video cable
AUDIO input terminal
S-VIDEO input terminal
VIDEO input terminal
To S-VIDEO output terminal
To VIDEO output terminal
Commercially available S-video cable
To AUDIO output terminal
