7
This section explains how to use a smart device for remote control of a computer running Network
Connection.
Important!
To perform remote control operation described here, your smart device will need to have
C-Assist installed on it (see the separate “Network Function Guide”).
To start PC remote
1.
Perform the procedure under “Establishing a Direct Wireless LAN Connection
between the Projector and a Computer” in the separate Network Function Guide.
2.
On the smart device, start up C-Assist and then perform the steps below.
(1) Log in to the projector.
(2) Enter PC Remote standby.
3.
On the Network Connection window, click
and then click [PC Remote] on the
menu that appears so there is a check mark next to it.
This will cause an image of the computer screen to appear on the smart device’s touch
screen.
The above indicates that you can use the smart device’s touch screen to perform computer
mouse operations. You can also use the smart device’s on-screen keyboard to input and edit
data on the computer.
4.
Control the computer from the smart device as required.
To exit PC Remote
On the Network Connection window, click
and then click [PC Remote] on the menu that appears
to clear the check mark next to it.
Remotely Controlling a Computer from a Smart Device
