6
CASIO Projector LOGO Loader Error Messages
Error Message
Possible Cause and Required Action
There is a problem with the file
format.
ID-01
There may be something wrong with the logo header data.
Download the logo header data for your projector again and then perform the
procedure under “To transfer a user logo to the projector” again.
A connection could not be
established with the projector.
Check the USB cable connection,
turn the projector off and then
back on, and then try again.
ID-02
Could not connect with the projector. Check the points below.
Is the USB driver installed on the computer? See “To install the USB
driver”.
Is the USB cable connected correctly to the computer and the projector?
Is the projector turned on?
This logo header file is for a
different model.
ID-04
The logo data cannot be transferred because it is for a different projector
model.
Go to the CASIO website and download logo data that is compatible with your
projector model, and then perform the procedure under “To transfer a user
logo to the projector” again.
The logo data was too large to
transfer.
Reduce the image size and try
again.
ID-05
The image file is too large (too many pixels). Use a file that is the appropriate
size as described under “User Logo Image Files”.
This type of image file is not
supported.
ID-06
The image file is not the correct type. Use a file that is the appropriate type as
described under “User Logo Image Files”.