Casio XJ-M140, Setup Manual

Page: 16 / 72

E-14
Starting and Stopping Projection
1.
Use the bundled AC power cord to plug the projector into a power outlet.
NOTE
z
This product is also designed for IT power distribution system with phase-to-phase voltage 230V.
2.
Turn on the computer that is connected to the projector.
3.
If the projector lens cover is covering the lens, remove it.
z
To remove the lens cover, insert your fingers into its recesses and squeeze towards the middle.
4.
Press the [
P
] (Power) key.
z
The first time you turn on the projector, a “Language” window will appear in the center of the
projection screen. Select the language you want.
5.
Select the input source
z
Press the [INPUT] key to display a list of input sources. Use the [
T
] and [
S
] keys to select
“Computer” and then press the [ENTER] key.
6.
Adjust the size and the focus of the projected image.
z
Use the zoom ring of the projector’s lens to adjust the size of the projected image, and the focus
ring to adjust the focus.
NOTE
z
The projector has a keystone correction feature that
prevents distortion of the projected image when projecting
from an angle. The projector detects when it is at a vertical
angle to the screen and performs keystone correction
automatically.
You can use the [KE] and [KEYSTONE –] keys to
adjust keystone correction manually.
To start projection
Zoom ring
Focus ring
Smaller
Larger
XJ-M_Setup_03_e.fm 14 ページ ２０１１年２月７日 月曜日 午後５時４４分