67
Troubleshooting
Indicators keep you informed about the current operational status of the projector. The following
shows what the indicators look like when operation is normal.
When a warning message appears on the projection screen, or when the POWER/STANDBY, LIGHT,
and TEMP indicators are lit or flashing in a pattern other than those shown above, it means that a
projector error has occurred. For details, see “Error Indicators and Warning Messages” (below).
Indicators
When the indicators appear
like this:
It means this:
POWER/
STANDBY
LIGHT
TEMP
You have just plugged the AC power cord into a power outlet. Wait
until the projector enters the standby state (see below) before trying
to turn on power.
z
z
z
Red
Amber
Amber
z
c
c
Standby state: The AC power cord is plugged in and the projector is
in standby.
Red
z
z
Projector is warming up after being turned on.
Green
Amber
Amber
z
c
c
Projector is on and standing by for use.
“Off” is selected for the projector’s Eco Mode (page 53) setting.
Green
z
z
c
Projector is on and standing by for use.
“On (Auto)” or “On (Manual)” is selected for the projector’s Eco Mode
(page 53) setting.
Green
Green
c
c
Projector is performing internal power down processes.
Red
z
: Lit
: Flashing
c
: Unlit
Summary of Contents for XJ-A Series
Page 103: ...MA2008 D...
