General Guide
16
General Guide
This section defines the names and explains the main functions of each part of the projector.
[Front/Right Side]
1
Remote control signal receiver : Receives the remote control signal.
)
Remote Controller Signal Range (page 27)
2
Lens
: Projects the image from the projector.
3
Lens cover
: Covers the lens to protect it. Be sure to open this cover
when using the projector.
Should the lens cover become accidentally detached, use
the procedure under “Reattaching the Lens Cover” on
page 101 to reattach it.
4
Focus ring
: Rotate to focus the projected image.
5
Zoom ring
: Rotate to change the size of the projected image.
)
Zoom and Focus (page 47)
6
Release button
: Press to release the elevation adjustment foot.
Caution!
Never look into the lens while the projector is turned on.
1
2
45
6
3
