E-27
Switching On/Off and Sleep
Switching On
1. Hold down the power button until the noti
fi
cation LED lights green (approx. 1 sec.).
The startup screen appears.
The screen shown differs depending on the device settings.
If the tablet is left unused for a set time while switched on, it automatically switches
to sleep mode.
Important!
Even with the AC adaptor connected, if the level of battery charge is 5% or less
the charge LED turns red and the tablet does not start up when you hold down
the power button.
Once the battery charge rises to 6% or more, the LED turns orange and the
tablet automatically starts up.
Switching Off (Shutdown)
1. Hold down the power button for more than 2 seconds until “Power off” is displayed.
2. Tap “OK”.
Note
In the power off state, the tablet's operation is fully stopped.
Switch the power off if the tablet is left unused for a long time.
The tablet will restart if it is connected to an external power supply, such as the
AC adaptor or cradle.
Sleep
1. Press the power button while the tablet is switched on.
Note
In sleep mode, the display is off but the tablet is operating.
The operation mode is maintained. When you switch on the power, you can use
the tablet immediately.
•
•
•
•
•
•
•
•
•
Summary of Contents for V-T500 Series
