INSTALACIÓN
ADDITIONAL IN
1
2
REFERENCIA RÀ
3
MULTI-LINE
INSTALLATION
BATTERY BACKUP
Install one fresh 9 volt (9V) battery to protect
your greeting, incoming messages and any
programmed information (i.e. time/day stamp)
during a power failure. The programmed
information is saved during a power
failure until the battery is depleted.
INSTALLING A 9V
BATTERY
To protect your messages and programmed
information during a power failure:
Disconnect the AC Adapter from the
electrical wall outlet. Turn the TA-119 over
and remove the battery cover.
Install a 9V alkaline battery. Make sure the
battery is connected correctly. Replace the
cover. Reconnect the AC Adapter.
TWO-LINE INSTALLATION
Two-line installations may require a two line
T-Adapter for your machine to operate correctly.
The T-Adapter allows you to connect your
machine to Line 1 or Line 2. The TA-119 will
only answer one line.
Installations with more than two lines, such as a
business phone system, may require a separate
RJ11 jack for answering machines. Please
contact your telephone equipment provider for
additional information.
You can use the TA-119 as an extension phone
on a business phone system, but some systems
will require that you install an A+A1 Adapter to
light the in-use indicator on the receptionist’s
console. See the accessory order form to order
an A+A1 Adapter.
IMPORTANT
SAFETY INSTRUCTIONS
CLEANING THE TA-119
NOTE:
■
Make sure a
disconnectin
greeting and
be recorded
Clean the plas
only. Do not u
of any kind.
Comien
CAUTION:
To reduce the ri
follow these ins
1. Use only a 9
1604A size batt
2. Do not dispo
may explode. C
special disposa
3. Do not open
electrolyte is co
eyes or skin. It
4. Exercise car
short the batter
rings, bracelets
may overheat a
5. Do not attem
provided with o
The batteries m
6. Do not attem
provided with o
heating them. S
may occur caus
7. When replac
replaced at the
discharged batt
pressure and ru
(Applies to prod
separately repla
8. When insert
proper polarity
insertion of batt
result in leakage
employing more
primary battery
9. Remove the
product will not
(several months
battery could le
10. Discard “dea
“dead” batteries
11. Do not store
with or identifie
temperature are
or refrigerator f
should be prote
and defrosting.
temperature pri
BAT
CAUTION: Disconnect the TA-119 from the
power outlet before cleaning.
ON
essages:
uring the voice menu.
tion was chosen, once you disconnect
messages are permanently deleted.
ng up, you may change your mind and
s by pressing
2 on the touchtone
10 seconds of your last remote
ORD A MESSAGE
age for yourself or a household
a remote location.
n the touchtone keypad to record
ssage.
ear:
one, begin speaking. Press
4
finish speaking.
Please record a
message. Press four
when finished.
D A NEW GREETING
n the touchtone keypad
your new
You will hear:
Record new
greeting. Press
five when finished.
one, begin speaking.
when you finish speaking.
greeting will play. You will hear
e menu again. Select another
hang up.
Y MESSAGE FILE
2
n the
keypad.
Enter six to play
message file.
Filed messages will be played. You will hear
the remote menu again. Select another
option or hang up.
REPEAT MESSAGES
1
1
Press
❋
❋
❋
❋
❋
once to repeat the current
message.
SKIP BACKWARD
Press
❋
❋
❋
❋
❋
twice to skip backward to
previous messages.
SKIP FORWARD
1
Press
#
once to skip forward to the next
message.
REMOTE ACTIVATION
1
Call and let your phone ring 10 times. The
TA-119 will answer and will ask for your
remote access code. Enter your
3-DIGIT
REMOTE CODE
.
1
2
Enter your
3-DIGIT REMOTE ACCESS
CODE
after hearing three beeps. (See
"REMOTE MESSAGE RETRIEVAL.")
After listening to messages, you may press
3
on the keypad to erase messages or, as
a specific message plays, press
3
to
individually erase that message.
MESSAGE RETRIEVAL WHEN
MEMORY IS FULL
You can skip forward through messages.
If you leave your home or office without turning
on your TA-119, you can do so from any
telephone.
If the TA-119’s memory is full, you will hear three
short beeps. To retrieve messages remotely when
the TA-119’s memory is full:
reeting from a remote location.
essages in Message File from a
n.
2
The TA-119 will turn on and will begin the
remote access menu.
NOTE:
■
If the remote access code is not entered properly, the
TA-119 will not turn on.
