background image

— 3 —

4. While the DST (daylight saving time) on/off setting is selected, press 

C

 to switch

between daylight saving time (summer time) and standard time.

• The display shows “On” and the indicator “DST” appears on the display when daylight

saving time is switched on.

• Note that the daylight saving time / standard time setting affects only the currently

displayed World Time zone.  Other time zones are not affected.

5. While the hour or minutes digits are selected (flashing), press 

C

 to increase the

number. Holding down 

C

 increases the number at high speed.

6. After you set the time, press 

A

 to return to the normal World Time Mode.

• If you do not operate any button for a few minutes while the DST on/off, hour or

minutes selection is flashing, the display automatically goes back to the normal World
Time Mode.

World Time Mode and the time calibration signal

• Whenever the current time is changed based on time calibration signal data that is

received, the times for the World Time zones are also adjusted.

ALARM MODE

C

B

A

Minutes

Mode indicator

Hour

When the Daily Alarm is switched on, the alarm sounds
for 20 seconds at the preset time each day.  Press any
button to stop the alarm after it starts to sound.
When the Hourly Time Signal is switched on, the watch
beeps every hour on the hour.
Note that the Daily Alarm and the Hourly Time Signal
operate based on the digital time setting.

To set the alarm time and switch the Hourly
Time Signal on and off

1. Hold down 

A

 while in the Alarm Mode until the hour

digits start to flash on the display.  The hour digits
flash because they are selected.  At this time the
Daily Alarm is switched on automatically.

2. Press 

B

 to change the selection in the following

sequence.

On

Off

Hour

Hourly Time Signal setting

Minutes

3. Press 

C

 to increase the selected hour or minutes digits.  Holding down 

C

 changes

the number at high speed.

• The format (12-hour and 24-hour ) of the alarm time matches the format you select for

normal timekeeping.

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as morning (am) or afternoon (pm).

4. While the Hourly Time Signal setting is selected, press 

C

 to switch the hourly time

signal on and off.

5. After you set the alarm time, press 

A

 to return to the normal Alarm Mode.

The following shows how the display automatically changes if you do not operate any
button for a few minutes while in the Alarm Mode.

Timekeeping display

Alarm time

setting

(flashing)

Normal Alarm

Mode

(not flashing)

A few

 minutes

A few

 minutes

To switch the Daily Alarm on and off

While in the Alarm Mode, press 

C

 to switch the Daily Alarm on and off.

Alarm time set for 6:30

No alarm time set

Press 

C

To test the alarm

Hold down 

C

 while in the Alarm Mode to sound the alarm.  Note that pressing 

C

 also

switches the Daily Alarm on and off.

CITY CODE TABLE

City

Other major city in same time zone

Difference

between GMT

City

code

-10

HNL

HONOLULU

PAPEETE

-09

ANC

ANCHORAGE

NOME

-05

NYC

NEW YORK

MONTREAL, DETROIT, MIAMI, BOSTON, PANAMA CITY,
HAVANA, LIMA, BOGOTA

-08

LAX

LOS ANGELES

SAN FRANCISCO, LAS VEGAS, VANCOUVER, SEATTLE,
DAWSON CITY

-07

DEN

DENVER

EL PASO, EDMONTON

-06

CHI

CHICAGO

HOUSTON,DALLAS, NEW ORLEANS, MEXICO CITY,
WINNIPEG, FORT WORTH

-03

RIO

RIO DE JANEIRO

SAO PAULO, BUENOS AIRES, BRASILIA, MONTEVIDEO

-04

CCS

CARACAS

LA PAZ, SANTIAGO, PORT OF SPAIN

+01

BER

BERLIN

MILAN, ROME, MADRID, AMSTERDAM, ALGIERS, HAMBURG,
FRANKFURT, VIENNA, STOCKHOLM, PARIS, LISBON

+02

CAI

CAIRO

ATHENS, HELSINKI, ISTANBUL, BEIRUT, DAMASCUS,

JRS

JERUSALEM

CAPE TOWN

+00

LON

LONDON

DUBLIN, CASABLANCA, DAKAR, ABIDJAN

+03

JED

JEDDAH

KUWAIT, RIYADH, ADEN, ADDIS ABABA, NAIROBI

+10

SYD

SYDNEY

MELBOURNE, GUAM, RABAUL

+11

NOU

NOUMEA

PORT VILA

+12

WLG

WELLINGTON

CHIRISTCHURCH, SUVA, NAURU ISLAND

+9.5

ADL

ADELAIDE

DARWIN

+6.5

RGN

YANGON

+5.5

DEL

DELHI

BOMBAY, CALCUTTA, COLOMBO

+05

KHI

KARACHI

+4.5

KBL

KABUL

+3.5

THR

TEHRAN

SHIRAZ

+04

DXB

DUBAI

ABU DHABI, MUSCAT

+06

DAC

DHAKA

+09

TYO

TOKYO

SEOUL, PYONGYANG

+07

BKK

BANGKOK

JAKARTA, PHNOM-PENH, HANOI, VIENTIANE

+08

HKG

HONG KONG

SINGAPORE, KUALA LUMPUR, BEIJING, TAIPEI, MANILA,
PERTH, ULAN BATOR

Summary of Contents for QW-785







Reviews: