— 3 —
To record split times
1. Press
D
to start the stopwatch.
2. Press
B
to display the timing up to that point. Stopwatch timing continues internally.
•
At this time, the mode indicator “STW” is replaced by “SPL” on the display, indicating
that the split time is being recorded.
3. Press
B
to clear the split time and to continue time measurement on the display.
•
You can repeat steps 2 and 3 as many times as you want.
4. Press
D
to stop the time measurement.
5. Press
B
to clear the stopwatch to all zeros.
To time first and second place finishes
1. Press
D
to start the stopwatch.
2. Press
B
when the first finisher crosses the line, and record the time.
3. Press
D
when the second finisher crosses the line.
4. Press
B
to display the finishing time of the second finisher.
5. Press
B
again to clear the stopwatch to all zeros.
HAND SETTING MODE
Seconds
Hours
1/100
second
Minutes
Mode indicator
1. Make sure that your watch is in the Calendar Mode.
If not, use
C
to enter the Calendar Mode.
•
The calendar of the current month appears on the
display, with the current date flashing, whenever
you enter the Calendar Mode.
2. Pressing
D
scrolls forward to the next month’s cal-
endar, and pressing
B
scrolls back to the previous
month.
•
Holding down either button scrolls the calendars at
high speed. After two years scroll, the watch starts
to scroll year-by-year on the January calendar (for-
ward scroll) or the December calendar (back scroll).
The Stopwatch Mode lets you measure elapsed time,
split times, and two finishes. The range of the stop-
watch is 23 hours, 59 minutes, 59.99 seconds.
To measure elapsed time
1. In the Stopwatch Mode, press
D
to start the stop-
watch.
2. Press
D
to stop the stopwatch.
•
You can resume the measurement operation by
pressing
D
again.
3. Press
B
to clear the stopwatch to all zeros.
STOPWATCH MODE
To edit Telememo data
1. In the Telememo Mode, use
B
or
D
to scroll through the data items and display the
one you want to edit.
2. Hold down
A
until the flashing cursor appears on the display.
3. Use
C
to move the cursor to the character you want to change.
4. Use
B
or
D
to select the character you want.
•
For details, see “To input Telememo data” (steps 4 through 5 for name input, or 7
through 8 for number).
5. After editing the data, press
A
to store it.
•
The message “SORT” appears on the display and stays there while data is being
stored into alphabetical order. After the sort operation is complete, the display
returns to the normal Telememo Mode display (the flashing stops).
To delete a Telememo item
1. In the Telememo Mode, use
B
or
D
to scroll through the name data and display the
one you want to delete.
2. Hold down
A
until the cursor appears on the display.
3. Hold down
B
and
D
until the message “CLR” appears on the display indicating the
data is deleted. At this time the cursor appears on the display ready for input.
Press
A
again to return to the normal Telememo Mode (without a cursor).
•
If you want to input more data, start from step 3 under “To input Telememo data”.
CALENDAR MODE
The Calendar Mode lets you view full month calendars for any month from January
1996 to December 2020. The short bar in the upper left of the calendar indicates that
the first day of the week in the calendar is Sunday.
When the time shown on the display does not match
the analog setting, use this mode to correct this situa-
tion by changing the analog setting.
To set the analog time
1. Make sure that your watch is in the Hand Setting
Mode. If not, use
C
to enter the Hand Setting Mode.
2. Hold down
A
while in the Hand Setting Mode until
the mode indicator starts to flash on the display.
3. Press
D
to advance the hands of the analog time-
piece.
4. After you set the analog time, press
A
to return to
the normal Hand Setting Mode (the flashing stops).
Minute
hand
Mode
indicator
Hour
hand
Current time
Current
date
•
The following shows how the display automatically changes if you do not operate
any button for a few minutes while in the Hand Setting Mode.
Hand time setting
(Flashing)
Normal Hand Setting Mode
(No flashing)
Timekeeping Mode
AUTO DISPLAY FUNCTION
The Auto Display function of this watch continually changes the contents of the digital
display. Note that you cannot use any of the watch’s other functions while the Auto
Display function is operating.
To turn the Auto Display on
Hold down
C
for about two or three seconds in any
mode until the watch beeps.
To turn the Auto Display off
Hold down
C
for about two or three seconds until the
watch beeps. At this time, the watch is in the Time-
keeping Mode.
Note
The Auto Display function cannot be performed while you are making settings (i.e.
while digits or other settings are flashing on the display).
Calendar
Year
Month
Minutes
Hour
Hourly Time
Signal on indicator
ALARM MODE
When the Daily Alarm is switched on, the alarm sounds for 20 seconds at the preset
time each day.
When the Hourly Time Signal is switched on, the watch beeps every hour on the hour.
Note that the Daily Alarm and the Hourly Time Signal operate based on the digital time
setting.
To set the alarm time
1. Make sure that the watch is in the Alarm Mode. If
not, use
C
to enter the Alarm Mode.
2 Hold down
A
while in the Alarm Mode until the
hour digits start to flash on the display. The hour
digits flash because they are selected. At this time
the Daily Alarm is switched on automatically.
3. Press
C
to change the selection in the following
sequence.
Mode
indicator
Hour
Minutes
Alarm time setting
(Flashing)
Normal Alarm Mode
(No flashing)
Timekeeping Mode
Both on
Both off
Daily Alarm
only
Hourly Time
Signal only
4. Press
D
to increase the selected digits and
B
to decrease them. Holding down
either button changes the number at high speed.
•
The format (12-hour and 24-hour) of the alarm time matches the format you select
for normal timekeeping.
•
When setting the alarm time using the 12-hour format, take care to set the time
correctly as morning or afternoon (indicated as “P” on the display).
5. After you set the alarm time, press
A
to return to the normal Alarm Mode (the
flashing stops).
•
The following shows how the display automatically changes if you do not operate
any button for a few minutes while in the Alarm Mode.
To switch the Daily Alarm and Hourly Time Signal on and off
Press
D
while in the normal Alarm Mode (when no digit is flashing) to change the
status of the Daily Alarm and Hourly Time Signal in the following sequence.
To stop the alarm
Press any button to stop the alarm after it starts to sound.
To test the alarm
Hold down
D
while in the normal Alarm Mode to sound the alarm.
Alarm on
indicator
