— 3 —
COLOR ADJUSTMENT
THE COLOR ADJUSTMENT IS REQUIRED AFTER THE FOLLOWING SITUATIONS
* The flash memory is initialized by the "AMED-I" command.
* The digital PCB or the camera unit is replaced.
REQUIRED TOOL
Light box: Handy 5000 (Code No.: 1904 5301)
Color filter: LBA 3 (Code No.: 1904 5302)
Color adjustment software: Sdj770vb.exe
Cable for QV-Link
TO DO THE COLOR ADJUSTMENT
1. Connect QV-70 to PC with QV-Link cable.
2. Set the aperture switch of QV-70 to F8.
3. Put the color filter on the light box, and turn the light box on.
4. Put the QV-70 with its lens toward the color filter and light box, and turn the QV-70 on.
5. Execute the color adjustment software "Sdj770vb.exe" on PC (MS-DOS).
Type "Sdj770vb", then press Enter. The message "WAIT" appears on the QV-70 and some parameters
appear on the PC like as the followings.
SUMCODE = 835321
adjust for KX770.
*******************************************
* COLOR ADJUSTMENT for KX770 *
* ver 1.0 *
*******************************************
CAUTION!!! Set f-stop to F8, otherwise doesn't work correctly.
Now adjusting... 0 2
done.
System block 1FE
ASUM 4AB40 CSUM 35662
DSUM 2EA67 ESUM 558FF
RKD FE30 RKE 1D0
BKA 1F0 BKC FE10
GKC 200 GKD 100 GKE FF00
ALPHA FFFC BETA FF82 TINT 155
RAlimit_L BBB RAlimit_H FE0
BAlimit_L 1298 BAlimit_H 1ECE
COL_BAS 28 Y_OFFSET 2
RAMP_INIT DCD BAMP_INIT 18B3
LIN_SUB 108 LIN_SUBY F8
Color filter: LBA 3
Light box: Handy 5000
QV-70
