Casio QV-5500SX, Service Manual & Parts List

Page: 6 / 48

— 4 —
ADJUSTMENT
1. Adjustments to be done
(1) Whole unit
1. Loading ADJ program
2. White balance, Sensitivity
3. White scratch correction
4. Flash operation and charge current check
5. VCOM-DC adjustment
6. Current consumption
Note:
When the lens ass'y is replaced, adjustment should be done in order of above 1, 2, and 3.
(2) D-PCB
1. Function check
(3) L and BL PCBs
1. VCC2 adjustment and VCC13, VCC7, VEE2 voltage check
2. VCO free run frequency adjustment
3. Backlight drive voltage adjustment
4. VCOM AC adjustment and VCOM DC coarse adjustment
5. Brightness voltage setting and contrast adjustment
(4) PW-PCB
1. VCC18, VCC15, VEE7 voltage adjustment
2. Necessary equipment
1. PC (OS : Windows 95 or 98)
2. Link cable
3. Digital oscilloscope
4. Voltage regulator
5. Ammeter
6. AC adaptor
3. Caution
Use an AC adaptor for camera's power source unless otherwise specified.
Do not tell outsider about the camera's test program mode.
Do not execute other programs than specified in this manual.