Digital Piano Operations
EN-38
There are two ways to change the tempo (beats per minute)
setting: using buttons to specify a tempo value, and tapping a
beat with a keyboard key or a pedal.
• You can specify use of a letter (T) or an icon (
2
) as the
display indicator to the left of the tempo value. To specify
the indicator type, use FUNCTION parameter
(“Tempo
Indicator”). For information about FUNCTION parameters,
see “
Configuring Function Settings (FUNCTION Mode)
(page
).
■
To specify a tempo value
1.
Touch
bm
TEMPO
.
The current tempo value will be shown on the display.
2.
Use the
bk
–
and
bl
+
buttons to adjust the
tempo value.
• You can specify a tempo value in the range of 20 to
255.
• To return the currently selected song, rhythm pattern,
or music preset to its recommended tempo setting,
touch
bk
–
and
bl
+
at the same time.
3.
To exit the setting screen, touch
bm
TEMPO
or
bp
EXIT
.
■
To use the keyboard key or a pedal to adjust the
tempo
1.
Hold down the
bm
TEMPO
button.
This causes “TAP” to appear to the right of [TEMPO] on
the display.
2.
Press a keyboard key or a pedal at least twice
in succession.
• This will set a tempo that corresponds to the speed at
which you pressed the keyboard key or pedal.
3.
Release
bm
TEMPO
.
• You can use the above steps to set an approximate
tempo and then use the steps under “
” to fine tune the setting.
• Note that an expression pedal cannot be used to set a
tempo using the above procedure.
Selecting a Music Preset instantly changes the Digital Piano
to a preset setup (tone, rhythm, chord progression, etc.) for
play of songs of various genres/categories. The press of a
button sets up the Digital Piano so those songs sound exactly
the way you thought they should. See the separate “Built-in
Music Data Lists” for a complete list of the 310 Music Presets
that are available.
■
To perform using a music preset
1.
Use the
3
mode selector button to cycle
through setting until the “RHYTHM” or
“ACCOMP” indicator is lit.
2.
Use the
bp
^
button to cycle through settings
until the “
^
RHYTHM” indicator to the right of
the button is lit.
3.
Hold down the
bq
POPS
button until “[MUSIC
PRESET]” appears on the display.
This enters the Music Preset Mode and causes the
3
mode selector button “ACCOMP” indicator to flash.
• The name and number of the currently selected music
preset will be shown on the display.
• This enters synchro start standby, which is indicated
by the flashing yellow and red LEDs above the
8
START/STOP
button.
Changing the Auto
Accompaniment and Song Tempo
[
T E M P O
]
T : 1 2 0
1 2 0
Using Music Preset
or
[
M U S I C P R E S E T
]
T : 1 2 4
0 0 1 : S o f t P o
p
Music preset number
Music preset name
Summary of Contents for Privia PX-S3000
Page 94: ...MA1903 A PXS3000 E 3A ...