manualshive.com logo in svg

Casio Privia PX-330BK, Service Manual & Parts Manual

Share
Download
Casio Privia PX-330BK Service Manual & Parts Manual Download Page 44

– 42 –

DIAGNOSTIC PROGRAM

Initial Setting

1.  Connect the AC adaptor.
2.  Connect the pedal (SP-3 or SP-32).

Even if a pedal unit is unavailable for the test, all the tests except for the pedal check may be performed.
*  SP-3 is the pedal unit that comes with PX-330. 

Connect it to the DAMPER PEDAL jack or the SOFT/SOSTENUTO PEDAL jack in the back of the 
main unit.

*  SP-32 is a pedal unit sold separately. 

Connect it to the pedal connector on the bottom of the main unit. 
To use SP-32, you will need the stand CS-67P, sold separately.

3.  "Main" volume: MAX
4.  Have a PC and a USB cable ready. (They will be used in the USB check.)

Operating System:  Windows

®

 XP (SP2 or later) *1

 

 

 

Windows Vista

®

 *2

    

Windows

®

 7 *3

 

  Mac 

OS

®

 X (10.3.9, 10.4.11 or later, 

10.5.6 or later, 10.6.6 or later

)

 

 

 

*1: Windows XP Home Edition/Windows XP Professional (32 bit)

 

 

 

*2: Windows Vista (32 bit)

    

*3: Windows 7 (32 bit, 64 bit)

How to start the diagnostic program

1.  Hold down the "FUNCTION", " <  / NO" and " >  / YES" buttons at the same time, to turn the power ON. 

After the diagnostic program is launched, Sub CPU ROM check will start.

The message below appears on the LCD.

TestMode MX901

SubCPU COM OK

2.  Release the "FUNCTION", " <  / NO" and " >  / YES" buttons.

Be sure to turn off the power when the test is finished.

Summary of Contents for Privia PX-330BK

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands