16
■
Editing a panorama image
This section describes how to edit a panorama image.
●
Fine-adjusting a panorama image
Adjust stitch width (overlapping portion) between images and cutoff position
for vertical size.
●
Other editing
You can add and delete an image to/from a panorama image. You can also
join both ends of the panorama image in a ring form.
Fine-adjusting a panorama image
You can adjust a panorama image by editing a stitch or by cropping.
●
Editing a stitch
Adjust stitch width (overlapping portion) between images.
You can adjust the stitch width with the left-hand image by dragging the
image. You can also adjust the horizontal level with the left-hand image by
dragging it up or down.
●
Cropping
Adjust the cutoff positions of an image.
You can specify the height (upper and lower cutoff positions) of an image by
dragging the cropping lines (lines displayed at the top and bottom of an
image).
*
Descriptions here assume that a panorama image is displayed in the edit
window. If a panorama image is not displayed, call up a panorama image
by referring to “Calling up an image” (page 9).
