— 5 —
5.
Press the
AAAAA
button to
advance to hour and
minute hand home
position adjustment.
•
If current hour and minute
hand alignment is correct,
they will both move to
12 o
’clock.
6.
Check the position of the
hour and minute hands.
•
If the hour and minute hands
are not pointing at 12 o
’clock,
it means that their home
position is of
f.
12 o
’clock
Correct Alignment
12 o
’clock
12 o
’clock
3.
Check the position of the
second hand.
If the second hand is not
pointing at 12 o
’clock, it
means that its home position
is of
f.
If the second hand is pointing at 12 o’clock, advance to step 5.
4.
Press the
BBBBB
button to
move the second hand
clockwise, until it points at
12 o
’clock.
•
•
Each press of the
B
button
advances the second hand by
one second.
•
Holding down the
B
button
for about two seconds
advances the second hand at
high speed. High-speed
movement of the second hand
will continue until it completes
a full revolution, or until you
press any button to stop it.
Use the following procedure to adjust the home positions of
the hands and the date when the time setting is wrong, even
after the time calibration signal is received normally
.
1.
In the T
imekeeping Mode,
press the
BBBBB
button three
times to enter the Home
Position Adjustment
Mode.
2.
T
o
adjust the second hand
home position, hold down
the
AAAAA
button until the
second hand performs a
full rotation and stops
(about five seconds).
•
The analog hands do not
move during home position
adjustment.
Correct Alignment
12 o
’clock
12 o
’clock
12 o
’clock
Adjusting the Home Positions
If
appears for the date, advance to step 13.
12.
Perform the following
steps to adjust the date
home position.
Hold down the
B
button for
about two seconds to start
automatic high-speed
scrolling of the date.
The
is located between 31 and 1.
When the date gets close to
31, press the
B
button again
to stop the scrolling. Press the
B
button to advance the date
until
appears.
13.
Press the
AAAAA
button to exit
home position adjustment.
This causes the date to
change to the current date,
and the hour and minute
hands to move to the current
time.
Note that all button operations
are disabled while the date is
changing, and the hour and
minute hands are moving.
If the hour and minute hands are pointing at 12 o
’clock,
advance to step 10.
9.
Use the following steps to
move the hands
counterclockwise.
•
Press the
B
button to align
the hour and minute hands
with 12 o
’clock.
•
Each press of the
B
button
moves the hand setting 10
seconds.
•
Holding down the
B
button
for about two seconds moves
the hands at high speed.
High-speed movement of the
hands will continue until it
completes a 12-hour cycle, or
until you press any button to
stop it.
•
Move the hands at high speed until just before the setting you
want. Stop high-speed movement, and then press the
B
button to move in 10-second increments to move the hands to
12 o
’clock.
10.
Press the
AAAAA
button to
advance to date home
position adjustment.
•
•
•
•
The date indicator will show
if the date home position
is correct. Note that it can
take up to 90 seconds before
appears.
11
.
Check the date indicator
.
•
If the date indicator shows
something other than
, it
means that the date home
position is of
f.
12 o
’clock
Correct Alignment
indicator
indicator
14.
Press the
BBBBB
button to
return to the T
imekeeping
Mode.
•
This causes the second hand
to move to the seconds count
of the current time, where it
starts normal movement.
The watch will return to the
T
imekeeping Mode automatically if you
leave it in the Home Position
Adjustment Mode without performing
any button operation for two or three minutes.
After you complete the home position adjustment procedure,
place the watch in a location that allows good time calibration
signal reception, and then perform a manual receive
operation. See
“T
o
perform manual receive
” for more
information.
If the hour and minute hands are pointing at 12 o
’clock
and you want to set the hands by moving them
counterclockwise, advance to step 8.
7.
Adjust the hour and
minute hand home
position.
Use the following steps to move
the hands clockwise.
•
•
•
•
Press the
B
button to align
the hour and minute hands
with 12 o
’clock.
Each press of the
B
button
moves the hand setting
10 seconds.
Holding down the
B
button for about two seconds moves the
hands at high speed. High-speed movement of the hands will
continue until it completes a 12-hour cycle, or until you press
any button to stop it.
Move the hands at high speed until just before the setting you
want. Stop high-speed movement, and then press the
B
button to move in 10-second increments to move the hands to
12 o
’clock.
8.
T
o
move the hands
counterclockwise, press
the
AAAAA
button.
•
This will cause the minute
hand to move
counterclockwise about one
or two minutes, and then stop
around 12 o
’clock.
If the second hand home position is off
If the hour and minute hand home position is off
does not appear for the date
If
If the hour and minute hand home position is off