Using Pads (Tutorial)
EN-51
Use the procedure below to change the playback start
point of a sample.
1.
On the PAD screen, record the sample to one
of the pads.
•
For information about how to record a sample, see
the Digital Keyboard’s USER’S GUIDE (Basics).
2.
Touch “Pad Edit”.
3.
On the PAD DATA EDIT screen, touch
“Sample Edit”.
4.
Touch “Start Position” and then use the
9
w
/NO,
q
/YES
buttons to change the start
position.
•
Tapping the recorded pad or touching “
” on the
screen starts playback from the specified point.
5.
Save the sample using the procedure under
“Saving Pad Data” (page EN-51).
•
The start point of sample playback can be changed
only during the period from when the sample is
recorded up to the point it is saved as user data. The
playback start point of a preset or a saved sample
cannot be changed.
•
Setting a playback start point value of 44100 causes
playback to start after one second (44,100Hz
sampling frequency).
Use the procedure below to save data and/or setting
recorded to a pad.
1.
While the data you want to save is recorded
to a pad, touch “Pad Edit” on the PAD screen.
This displays the PAD DATA EDIT screen.
2.
On the PAD DATA EDIT screen, touch
“Write”.
3.
After inputting the data name, touch “Enter”.
4.
Touch the save destination user data and
then touch “Execute”.
5.
Touch “Yes”.
•
To cancel the save operation, touch “No”.
Use the procedure below to delete pad data you
previously created.
1.
On the PAD screen, touch “Pad Edit”.
2.
On the PAD DATA EDIT screen, touch
“Clear”.
3.
Touch the data you want to delete.
4.
Touch “Execute”.
5.
Touch “Yes”.
This deletes the data you selected.
•
To cancel the delete operation, touch “No”.
Changing the Start Point of
Sampled Data
Saving Pad Data
Deleting Pad Data
Summary of Contents for MX-X300
Page 90: ...MA1601 A...