Casio MX-X300, User Manual, Page: 8 / 90

Editing a Tone (User Tones)
EN-7
■
Melody Tone Editing Screen

Parameters frequently used for tone editing

Advanced settings

Effect settings. For more information, see “Editable Effect Parameters” (page EN-18).
Display Text Description Settings
Pitch Pitch envelope. The editable parameters in this group affect the pitch of
notes.
Octave Shift Octave shift. Changes the tone of notes in octave units. –2 to 0 to +2
Envelope • The figure below also applied to filter, amp, and other envelopes. With
the pitch envelope, the pitch of the sound corresponds to the vertical
(Level) axis.
• With a hex layer tone envelope, Decay Time can be divided into three
parts and Release Time can be divided into two parts and edited.
• When Decay Level 3 is reached during key release note on, an
immediate transition is made to Release Level 1 without sustain.
• The setting ranges of the parameters below are relative changes
(relative to the presets of the tone) in the case of melody tones and
drum tones. When editing a hex layer tone, they are absolute changes
that have no relation to the presets of the tone.
–
Time and level of each envelope
– Rate, depth, delay, rise, modulation depth of LFO (page EN-8)
Initial Level Initial level. Pitch of the sound at initial note on. –64 to 0 to +63
Attack Time Attack time. Time it takes until the attack level is reached from the initial
level. –64 to 0 to +63
Release Time Release time. Time it takes to reach Release Level after a key is released. –64 to 0 to +63
Release Level Release level. Target level reached immediately after a key is released. –64 to 0 to +63
  
IL
AL
DL1
DL2 DL3
RL1
RL2
AT DT1 DT3 DT2 RT1 RT2
Level
Time
DT RT
DL
RL
IL : Initial Level RT : Release Time
AT : Attack Time (RT1: Release Time 1)
AL
DT : Attack Level (RT2: Release Time 2)
: Decay Time RL : Release Level
(DT1: Decay Time 1) (RL1: Release Level 1)
(DT2: Decay Time 2) (RL2: Release Level 2)
(DT3: Decay Time 3)
DL : Decay Level
(DL1: Decay Level 1)
(DL2: Decay Level 2)
(DL3: Decay Level 3)