Casio LX-171, Operation, Service Manual & Parts List

Page: 10 / 15

To send all the data in a mode, starting from the main menu:
1. Start from the main menu.
2. Press FUNCTION. Then use
to highlight "Communication." Press EXE.
3. Use to highlight "Send Data." Press EXE.
4. Use to highlight "Mode Data." Press EXE.
5. Use and to select the name of the mode from which data you wish to send. Press EXE.
6. Use to highlight "Yes." Then press EXE. This begins data transfer to the receiving unit.
7. After the transmission has been completed, the main menu will reappear.
Sending All Data
Important!
The following procedure sends either all Open Memory Area data or all Secret Memory Area data. Before
starting to transmit, be sure to access the memory area (Open or Secret) which contains data you wish to send.
To send all data:
1. Begin from either the main menu or from a data display (Telephone Directry, Schedule, Data Memo "Diary",
or Calendar).
2. Press FUNCTION. Then use to highlight "Communication." Press EXE.
3. Use to highlight "Send Data." Press EXE.
4. Use to highlight "All Data." Press EXE.
5. Use to highlight "Yes." Then press EXE. This begins data transfer to the receiving unit.
6. After the transmission has been completed, the display you started from will reappear.
About the "Set up" Menu Item
You will probably notice that the menu appears on the display after you select "Communication" from the
function menu and press EXE. The "Set up" item contained in that menu is used for setting the parameters
of the My Magic Diary. Note, that the parameters should always be set to "None" (Parity) and "9600" (BPS)
for data communications between two units.
— 9 —